|Place of Origin:||China|
|Packaging Details:||standard wooden case|
|Supply Ability:||10 sets per month|
|Minimum Order Quantity:||1 set|
IPX4 Water Absorption Tester
Rain Spray Chamber/Technical parameters:
1.pendulum tube radius 0.6m, 1m (special order)
2.orifice: c0.4mm two hole spacing: 50mm
3.swing pipe Swing: 180 ((+/-) 90) placed tube diameter: c15mm
4.rain water pressure :80-100Kpa
5.Test Bench: 500*500mm test rig speed 1-17r/min (adjustable)
6.pendulum tube made of stainless steel (or brass). Laser drilling.
7.test bench adjustable angle :30-90
8.drip height adjustable :200-2000mm
Rain Tester/Control System:
1.the control part of the equipment is designed on the right equipment, the distribution of temperature controllers, control switch, easy to operate, simple and easy to maintain.
2.the controller adopts PLC programmable controller, respectively swing pipe, coil, wheel, water pump and test time control.
3.the use of imported components Schneider perform effectively ensure that the test run as standard.
4.put tubes, pipes and turntable spin independently of the control system.
5.then select the pendulum tube coil does not start, choose coil tube is placed not start.
6.each time setting control several independent systems.
Water Permeability Test/Site conditions:
1.Temperature: 15 degree ~ 35 degree
2.Relative humidity: not more than 85% RH
3.Around without strong vibration, no strong electromagnetic fields
4.No high concentrations of dust around and corrosive substances
5.No direct sunlight or other sources of heat radiation
6.No strong airflow around when you need to force the ambient air flow, air flow should not be blowing directly on the box.
7.Chamber should be placed smoothly, maintain the level.
8.Around the chamber should leave some distance, easy maintenance operation.
1.ambient temperature: 5 degree ~ +28 degree (24-hour average temperature (</=) 28 ℃)
2.humidity: (</=) 85%
3.before the machine is placed about 80 cm can not be placed on things;