Xenon weathering test chamber to simulate damage from the sun, rain and dew caused . Xenon weathering chamber xenon lamps simulate the effect of sunlight , moisture condensation using simulated rain and dew , the test material is placed in a light and moisture alternating temperature test cycle program , the number of days or a few weeks time, i.e. reproducible hazards outdoors for several months or even years appeared .
Xenon Aging Testing Machine/Technical Specifications:
1.temperature range:RT +10 degree ~ 70 degree
2.humidity:50% ~ 90% R.H. [sales(at)aslitesting.com]
3.Blackboard temperature:55 degree ~ 90 degree about 3 degree
4.the temperature fluctuation:less than about0.5 degree ( no load )
5.the temperature uniformity:less than about 2 degree ( no load )
6.humidity fluctuation:+2%, -3% R.H ( no load )
7.Xenon light source:imported air-cooled lamp ( lamp life of 1600 to 1800 hours )
9.rainfall time:1 ~ 9999min, adjustable continuous rainfall
10.the rainfall cycle:1 ~ 240min, interval ( off ) Adjustable rainfall
11.water cycle ( spray time / not spray time ): 18min/102min
Xenon Test Machine/Features:
1.Box overall use 1.2mm thick stainless steel SUS316L experimental environment to meet the requirements under long-term operation. Overall nice and durable.
2.door : single door seams with anti-aging silicone rubber as the sealing tape .
3.the observation window : 1 (300mm*700mm), multi-layer hollow glass , glazing paste outer radiation filtration paper to protect the operator 's eyes , a multilayer insulation to prevent condensation observation window .
4.water supply and cooling device fitted with the lower cabinet to ensure effective long-term water supply and cooling.
5.bottom mounting universal mobile casters , load: movement and positioning 800kg, convenient device.
7.air cooling,air-cooled heat exchanger with unsolicited cooled by a compressor to cool the heat exchange chamber,the temperature inside the closed-loop control and the blackboard by the temperature .
Weather Testing Chamber/Standard:
This series of equipment in accordance with one of the following countries and relevant test standards for the manufacturing industry, or a combination thereof .
1.Xenon illumination device ASTM G155 method for non-metallic
2.Solar radiation on the GB2423-24-1995 analog ground.
3.ASTM D4459 requirements of indoor exposure to xenon arc lamp plastic Standard Practice
4.Automotive : GB/T5137.3-96 automotive safety glass resistant to radiation simulated weathering test methods