Accelerated-Aging chamber for copper fittings
Product Features :
1.imported high temperature solenoid valve dual structure , to the maximum extent, reduce the use failure rate.
2.separate steam generating chamber , avoiding steam direct impact on the product , so as to avoid damage to the product locally .
3.door effort structure, to solve the shortcomings of the first generation disc locking handle difficult.
4.Test cold front ; cold air discharge test design ( air discharge test barrel ) increasing the pressure stability and reproducibility.
5.super- long-term experiment running time , long test machine 1000 hours of operation .
6.level protection , Sensor detection level protection through the test chamber .
7.tank pressure design, pressure -resistant casing (140 celsius degree) 2.65kg, in line pressure test 6kg.
8.two-stage pressure safety device , adopt a two-stage combined controller and mechanical pressure protection device.
9.rows of push button security , police emergency safety device two-stage automatic discharge pressure button.
1.set temperature :. +100 celsius degree ~ +135 celsius degree ( saturated steam temperature )
2.Humidity : 100percent steam humidity
3. pressurization time :. 0.00Kg ~ 1.04Kg/cm2 approximately 45 minutes
4.uniformity of temperature fluctuation : about 0.5 celsius degree
5.Temperature display accuracy : 0.1 celsius degree
6.pressure fluctuations uniformity : about 0.02Kg
7.degrees and humidity distribution are : about 5 percent RH
chamber dimensions :. PCT-45
2.full- size machine outside :. 900x800x1600mm (W * D * H)
3.within the barrel material: stainless steel plate material (SUS # 3163mm)
4.outer barrel material: stainless steel plate material
5.Insulation Material : wool and rigid polyurethane foam insulation
6.the steam room heating tube: titanium tube heating , never rust.
a.adopt -day RKC microcomputer control saturated steam temperature ( using the PT-100 platinum temperature sensing element ) .
b. time controller with LED display.
c. using the pointer display gauges.
d. Microprocessor PID control of saturated steam temperature .
e. manually into the valve ( automatic replenishment functions , without stopping the continuous test ) .
Mechanical structure :
a. circular inner box, stainless steel round test in the box structure , in line with the container industry safety standards to prevent condensation dripping test design .
b. round pieces lined , stainless steel round pieces of liners designed to avoid the direct impact of the latent heat of the steam test .
c. sophisticated design , good air tightness , water consumption, water can be continuously 400Hrs each operation .
d. patented design makes packing and cabinet doors more closely integrated with the traditional extrusion completely different , extend packing life.
e. way LIMIT critical point automatic safety protection, abnormal causes and fault indicators.
a. imports of high temperature seal solenoid valve , dual -loop structure, to ensure no leakage pressure .
b. machine is equipped with overpressure protection , overtemperature protection , a key relief , Manual Relief multiple security devices to ensure safe use of the user and to the maximum extent .
c. backpressure door lock device , the pressure inside the test chamber , the chamber can not open the door .